Search This Blog

Wednesday, March 9, 2011

Getting All Our Ducts in a Row








Since our last blog about the installation of the air-conditioners for the new transmitters, we've seen great progress. Now, I, CamKathy (Kathy Gregowske) have returned from Cambodia to once again add my non-techie views to this blog.
As Paul and I pulled up to the transmitter building after being away for several weeks, the first thing we noticed were the huge air-cons sitting on their platforms, but getting a quick tour showed that there was still much to be done. But these guys work quickly (weather permitting), and now most of the exterior work has been done to put the air-conditioning ducts in place including getting most of the power lines connected (see photo of Eli Sabin). The holes in the exterior wall where the ducts were put in, have been blocked up, so if you look at the wall from the inside you will see five (the sixth is out of sight) spots for the ducts. Each transmitter (the two new ones, and TX 1,2) will have both an intake and outtake duct. The intake duct will bring in the cold air from the air-conditioner while the outake duct will suck out the hot air produced by the transmitters themselves. Thus we have six ducts standing in a row!

1 comment:

  1. That is a good system where all the air will be let out in a row and also the design of the house will look good.

    ReplyDelete